| 型號 MODEL | FS-100H | |
| 主要產品 MAIN PRODUCT | PS,PP,PE板(SHEET) | |
| 產品厚度 THICKNESS OF PRODUCT | 0.2m/m – 1.2m/m | |
| 產品寬度 WIDTH OF PRODUCT(mm) | 300-1050 | |
| 產能 PRODUCTIVITY(kg/hr) | 120kg-160kg | |
| 押出機 EXTRUDER | ||
| 驅動馬達 DRIVE MOTOR | 無段變數馬達 INVERT MOTOR | 60 HP & 50KW INVERTER CONTROL PLANE |
| 齒輪箱 GREA BOX | 無段變數齒輪減速機 | |
| NO-STAGE VARIATION SPEED TYPE | ||
| 齒輪材質GREA MATERLIAL | 藍十字硬化及齒面研磨處理 | |
| SCM-21 NITRIDED POLISHE ＆ SURFACE GROUND | ||
| 冷卻方法COOLING DEVICE | 潤滑油冷卻 GEAR BOX LUBRICANT EXCHANGE | |
| 螺桿 SCREW | 螺桿直徑SCREW DIA(mm) | Ø100m/m |
| 長徑比L/D RATIO | 32:1 | |
| 材質 MATERIAL | SACM-645表面氮化處理及度應鉻 | |
| SACM-645 WITH NITRIDED POLISHE ＆ HARD CKROME PLATED | ||
| 料管 BARREL | 透氣式 VENTED TYPE | |
| 材質 MATERIAL | SACM-645表面氮化處理及孔內研磨拋光 | |
| SACM-645 WITH NITRIDED POLISHE TREATMENT | ||
| 自動溫控區 AUTO THERMAL CONTROLLER | 6 ZONES | |
| 電熱量 HEATING CAPACITY | 25kw | |
| 冷卻風谷AIR COOLING BLOWER | 1/6 HP x 6 PCS | |
| 油壓換網機構 SCREEN CHANGER | 模頭掀開換網 HYDRANLIC SCREEN CHANGER | 1 Set |
| T 型模頭 | T型模頭(模唇可調整) T-DIE(DIE LIPS ASJUSTABLE) | |
| T - DIE | 寬度WIDTH(mm) | 450-1200 |
| 自動溫控區 | 5 Points | |
| AUTO THERMAL CONTROLLER | ||
| 電熱量 HEATING CAPACITY | 12kw | |
| 引取部系統 | 輪寬ROLLER WIDTH(mm) | 1200 |
| TAKE-UP UNIT SYSTEM | 第一引取輪組直徑(THERMAL ROLLER) | Ø315＆ Ø315m/m |
| FIRST STAGE TAKE-UP ROLLERS DIAMETER | ||
| 第二引取輪組直徑 | Ø 160x Ø 160 m/m | |
| 2nd STAGE TAKE-UP ROLLERS DIAMETER | ||
| 驅動馬達DRIVE MOTOR | 5HP渦輪減速機 5HP with worm gear reducer | |
| 修邊刀組MARGIN WASTE CUTTER | 1 Set | |
| 毛邊捲收馬達 | 0.1kg-m TORQUE MOTORx2SETS | |
| MARGIN WASTE REWINDER MOTOR | ||
| 自動捲收台 (商議配備) | 雙輪翻轉式或隻輪固定式 TWO STAGE SYNCHRONNIZER TYPE | |
| AUTO WINDER | 捲收驅動馬達 ROLLING-DRIVE MOTOR | 0.3kg-m TORQUE MOTOR x 2SETS+1/80 SPEED REDUCER |
| (Deliberation OF equipped) | 翻轉馬達TUMBLING MOTOR | 1HPx4P x 1SET |
| 模溫輪溫控機 | 1 Set | |
| MOLD TEMPERATURE ROLLS OF THERMAL TANK | ||
| 電氣控制箱 CONTROL PANEL | 獨立式x1組 ISOLATED x 1Set | |
| 機械尺寸 DIMENSION OF MACHINE(LxWxH) | 14000x2100x2300 | |
| 機械毛重GROSS WEIGHT OF MACHINE | 6800kgs | |